JOIN THE ACADEMY! VISIT CONCRETESCHOOL.CO TO START LEARNING TODAY.

ON THIS EPISODE OF THE CONCRETE LOGIC PODCAST
Are we specifying air entrainment in concrete that does not need it?

Seth is joined by Dr. Bruno Fong Martinez, Baker Construction’s concrete materials expert, to examine when air entrainment protects concrete and when it creates unnecessary problems.

Air entrainment improves durability where concrete experiences repeated freezing, thawing, and moisture saturation. But Bruno argues that the industry often requires it in climates where that exposure does not exist.

That decision can reduce compressive strength, complicate testing, change mix performance, and contribute to rejected trucks and wasted material.

The conversation challenges engineers and contractors to move beyond copied specifications and evaluate air requirements based on the actual environment, exposure, and project risk.

WHAT YOU’LL LEARN
· The difference between entrapped air and entrained air
· How air voids help protect saturated concrete during freezing
· Why freeze-thaw damage depends on repeated freezing and thawing cycles
· Why colder locations do not always experience the most freeze-thaw damage
· How air entrainment complicates concrete production and acceptance testing
· Why air content can change during transportation, mixing, and pumping
· How additional air can reduce compressive strength
· Why strength loss may lead to more cement and greater thermal concerns
· How freezing and precipitation maps could improve regional specifications
· Why copied specifications can require air in environments that do not need it
· How early specification reviews and RFIs can reduce waste and concrete problems

CHAPTERS
(00:00) Introduction and support for the show
(03:34) Why unnecessary air entrainment matters
(05:07) Where air may and may not be necessary
(06:27) Entrapped air versus entrained air
(09:21) How air protects concrete during freezing
(11:40) Why freeze-thaw cycles matter
(12:48) Testing, rejected trucks, and concrete waste
(14:41) Strength loss and contractor concerns
(16:05) What happens to air during pumping
(17:22) Mapping freezing and saturation risk
(19:24) Why copied specifications create problems
(22:15) Building industry agreement around air entrainment
(24:25) Guest information and final takeaways

GUEST INFO
Dr. Bruno Fong Martinez
Concrete Materials Expert
Baker Construction
Guest link:
https://www.concretelogicpodcast.com/guests/bruno-fong-martinez/

CONCRETE LOGIC ACADEMY
The people who understand concrete are the people who get listened to.
Not the loudest person in the meeting.
Not the person copying requirements from an old specification.
The person who understands why a material or testing requirement belongs in the concrete usually has the most valuable voice in the room.
That is what Concrete Logic Academy is built for.
You get practical concrete education, professional-development courses, and real-world lessons connected to the same materials, durability, and construction problems discussed on the Concrete Logic Podcast.
Start learning here: https://concreteschool.co

SUPPORT THE PODCAST
If the Concrete Logic Podcast gives you value, send a little value back.
You can support the show here:
https://www.concretelogicpodcast.com/support/
You can also support the show through the KUIU affiliate link:
https://www.concretelogicpodcast.com/kuiu
Interested in sponsoring the podcast or working with Concrete Logic Media?
Email Seth:
seth@concretelogicpodcast.com

CREDITS
Producers: Zac Richardson, Jodi Tandett and Concrete Logic Media
Music by: Mike Dunton
https://www.mdunton.com/

WHERE TO FIND SETH
Concrete Logic Podcast:
https://www.concretelogicpodcast.com/
YouTube:
https://www.youtube.com/@concretelogicpodcast
LinkedIn:
https://www.linkedin.com/in/seth-tandett/
Concrete Logic Academy:
https://www.concretelogicacademy.com/

Until next time, let’s keep it concrete.